Construction Site Cleanup & Sweeping in Corpus Christi, TX
Covering the South Texas Region
Gulf wind moves sand and fines off a job site faster than most crews plan for. Moore Clean sweeps haul routes, gate approaches, and staging pavement for active builds across Corpus Christi and the Coastal Bend, with dated records for your SWPPP binder on every visit.
At a glance
Built for active job sites
General contractors working the Coastal Bend, from terminal and petrochemical construction along the Inner Harbor to retail pads on South Padre Island Drive and Saratoga Blvd and residential phases out toward Padre Island and Flour Bluff, bring us in to keep the street at the gate looking the way an inspector wants to see it. Crews work track-out, sand, and debris around pours, deliveries, and trade stacking, days or nights, and shift the cadence as the site plan moves.
Site cleanup on the coast is not housekeeping. It sits in the paperwork. Projects disturbing an acre or more operate under the TCEQ construction general permit (TXR150000), and the City of Corpus Christi storm water construction requirements ask that sediment be held at the source. What leaves a gate here drains toward Oso Bay and Corpus Christi Bay. Every Moore Clean visit is logged, which gives your SWPPP binder dated, active sediment control instead of silt fence photos from month one.
The workload is not letting up. The rebuilt Harbor Bridge on US-181 reshaped the downtown approaches, TxDOT keeps reworking stretches of SH 358 and I-37, and the U.S. Census Bureau’s Building Permits Survey tracks steady residential permitting across the metro. Each of those is future pavement with track-out to control.
Our routes
Haul routes swept and track-out held at the gate
What’s included
What construction site cleanup covers on a Coastal Bend build
- Track-out & haul-route sweeping
- Blown sand & fines along curb lines
- Sediment removal at gates & entrances
- Magnetic nail & metal debris sweeping
- Pre-pour & pre-inspection sweeps
- Paving & milling cleanup
- SWPPP-support documentation per visit
- Final cleanup before turnover
Sandy soil and salt air give Coastal Bend sites a different shed than inland caliche, so we run dust-suppressed machines built for fine material, including the TYMCO DST-4, a dustless sweeper made for exactly that grit, plus magnet bars that lift nails and tie wire off haul routes before a subcontractor finds them with a tire. At turnover, a final pressure wash brings flatwork back to a finished look.
This is exterior site work: construction sweeping, track-out control, and debris pickup on pavement, haul routes, and gate approaches. Interior post-construction janitorial cleaning is a different trade, and we can point you toward one if that is what the project needs.
Why it matters
What does a SWPPP ask of site cleanup in Corpus Christi and the South Texas region?
Under the EPA’s NPDES construction stormwater program and the TCEQ construction general permit (TXR150000), operators are expected to keep sediment on the site, and the street is where it leaves first. Track-out onto a public road is the easiest finding for an inspector to write up, because it is sitting in plain view on the drive in.
Scheduled sweeping turns that exposure into a paper trail: dated records showing track-out cleared at the gate, haul routes swept, and material hauled off. That is what a site super wants on hand when a city inspector walks the entrance, and it keeps sand and sediment out of the inlets that drain toward Oso Bay.
Construction Cleanup Power SweepingSweepers pull sand, grit, and small debris off haul routes and gate approaches.Get a quote →
Magnetic Nail PickupMagnet bars lift nails, screws, and tie wire that broom passes leave behind.Get a quote →
Debris RemovalPiles loaded, hauled, and logged, cleared without holding up the next trade.Learn more →
Power WashingWashing clears caked mud and salt residue from pads and walkways, with runoff recovered.Learn more →
Documentation
Dated sweep records for your SWPPP binder
Where we work
Construction site sweeping across Corpus Christi and the South Texas region
Routes cover active builds in Corpus Christi, from downtown and the SEA District through Southside pads along SPID, across the harbor to Portland, Ingleside and Aransas Pass, out to Rockport and Port Aransas on the coast, west through Calallen to Robstown, and south on US-77 toward Kingsville, spanning Nueces, San Patricio, Aransas and Kleberg counties. One-time pre-inspection sweeps, weekly service on active phases, and full final cleanup are all standard offerings.
Moore Clean | Corpus Christi & the Coastal Bend
513 McCampbell Rd, Corpus Christi, TX 78408 · (361) 289-5447 · Open 24 hours
Visit our home page to switch to a different Texas metro region.
Get started
Get a construction cleanup quote for your site in Corpus Christi and the South Texas region
Tell us the site, the phase, and the schedule, and we’ll put together a cleanup plan with SWPPP-support documentation included.
Get More Information
Select a service and fill out form
"*" indicates required fields
Questions
Corpus Christi construction cleanup FAQ
Can crews work around an active build schedule?
That is the job. We sweep around pours, steel deliveries, and trade schedules: early morning before the gate opens, evenings after the last truck rolls out, or midday between phases. On phased builds we set a recurring cadence and shift it as the site plan changes.
How do you handle blowing sand and Gulf wind?
Sandy soil and a steady breeze off the bay push fines onto curb lines and gate approaches between passes, so Coastal Bend sites often want a tighter cadence than inland ones. Our sweepers vacuum the fines with dust suppression rather than pushing them around, and passes get timed around the windiest hours where the schedule allows. After a storm or a hurricane-season blow, we can add a pass on short notice.
Is magnetic nail sweeping included?
Yes, on every construction sweep. Magnet bars run behind the sweeper on haul routes, gates, and laydown areas, pulling nails, screws, and tie wire that ordinary sweeping misses. It protects your subs’ tires today and the paving crew’s rubber at final. Clear work areas also mean fewer trip and puncture injuries, a point the Center for Construction Research and Training makes in its housekeeping toolbox talk for construction crews.
What documentation do you provide for our SWPPP?
Dated service records for every visit, showing what was swept, where, and what was hauled off, formatted so your site super can drop them straight into the SWPPP binder as evidence of active track-out and sediment control under the TXR150000 general permit.
Is this construction sweeping or post-construction cleaning?
Construction sweeping. We handle the exterior of the site: haul routes, gate approaches, staging pavement, curb lines, and the public street at the entrance, with magnet passes for nails and tie wire and records for your SWPPP file. Interior post-construction cleaning, meaning dust wipe-down, windows, and floors, is a separate trade that we do not perform.
Parking Lot Sweeping · Street Sweeping · Pressure Washing · Airport Sweeping · Garage Sweeping
Porter Service · Window Cleaning · Graffiti Removal · Hauling Debris · Handyman Services · Bundled Services