Austin, TX · Core Service
Austin, TX Commercial Pressure Washing
Storefronts, sidewalks, patios, and parking structures cleaned to like-new — with full wash-water recovery that keeps every gallon out of Austin’s creeks and the aquifer beneath them.
At a glance
Patio town, clean hardscape
Austin lives outdoors — patios on South Congress, storefront walkways at The Domain, food-truck courts in East Austin, office plazas along MoPac — and outdoor hardscape shows every spill, gum spot, and grease shadow. Moore Clean provides commercial pressure washing (also called power washing) across the metro: building exteriors, sidewalks and curbs, drive-thru lanes, dumpster pads, loading docks, and parking structures.
What separates commercial-grade washing from a rented machine is what happens to the water. Our rigs run full wash-water recovery — captured at the surface, filtered, disposed of properly — and nowhere in Texas does that matter more than a city whose storm drains feed Barton Springs’ watershed and the Edwards Aquifer recharge zone.
Austin routes
Austin storefronts, washed on rotation.
What’s included
What we pressure wash
- Storefront walkways & building entries
- Restaurant patios & dining courts
- Sidewalks, curbs & plazas
- Parking garages & stairwells
- Drive-thru lanes & fuel islands
- Dumpster pads & loading docks
- Gum, grease & tire-mark removal
- Post-construction final wash-down
Jobs run overnight and early morning to stay clear of patio hours, and recurring programs pair with parking lot sweeping and porter service under one Property Maintenance Bundle contract.
Deep-clean option
Cyclone deep-clean surface system
Some pavement needs more than a standard wash — years of gum, grease, and embedded grime on Domain-area plazas, downtown sidewalks, and garage decks. For those jobs we bring in a Cyclone Technology high-pressure surface system, rented for the projects that call for it.
The Cyclone’s enclosed cleaning head recovers wash water and slurry the moment it lifts off the pavement — cleaning up to 20,000 square feet an hour with no runoff to the curb. That containment is what the EPA’s stormwater best management practices call for on commercial wash-downs, and it leaves surfaces clean, dry, and back in service the same visit.
Why it matters
Why does wash-water recovery matter in Austin?
Under the federal Clean Water Act, wash water from mobile cleaning is a pollutant discharge that cannot legally enter a storm drain — the EPA’s NPDES program is explicit about it. Austin’s drains are rainwater-only by law and empty into the city’s creek network, which Watershed Protection actively monitors. An uncontained washing job here can put the property owner, not just the contractor, on the hook.
Our recovery-equipped rigs — including the Cyclone surface-cleaning system — capture wash water as it’s sprayed, filter the debris, and dispose of the water properly, with documentation for your records on every job. Over the recharge zone, we treat recovery as non-negotiable.
Pressure WashingSidewalks, pads, and entries washed on rotation — with wash-water recovery.Get a quote →
Porter ServicePorters keep entries and pads presentable between wash rotations.Learn more →
Parking Lot SweepingRegular lot sweeping keeps washed surfaces cleaner, longer — GPS-logged every visit.Learn more →
Compliance
Clean concrete, compliant runoff, across Austin.
Where we wash
Pressure washing across the Austin metro
Washing routes run out of our Round Rock facility — retail and hospitality from The Domain to South Congress, office and campus hardscape along US-183 and MoPac, HOA amenity areas across Cedar Park, Georgetown, and Pflugerville. One-time restoration cleans, recurring quarterly programs, and post-construction final washes are all standard.
Pressure washing is one of five core services we run in Austin alongside construction site cleanup, street sweeping, parking lot sweeping, and porter service — see everything we do on our Austin page.
Moore Clean — Austin
6801 CR 110, Round Rock, TX 78665 · (512) 775-1918 · Open 24 hours
Questions
Austin pressure washing FAQ
Can you wash restaurant patios without disrupting service?
Yes — patio washing runs after close or before open, and we sequence sections so furniture is moved, washed under, and reset. On South Congress and in East Austin, most patio programs run monthly or quarterly with spot service after events.
Where does the wash water go?
Not to the storm drain — that’s the point, and in Austin it’s the law with the city’s creek network and the recharge zone downstream. We capture the water at the surface, filter the debris, and dispose of it properly, with documentation for your records.
What’s the difference between power washing and pressure washing?
Heat, mostly. Power washing heats the water — faster on grease at drive-thrus and dumpster pads. Pressure washing uses ambient-temperature water — right for most concrete and storefront work. We run both and match the method to the surface and soil load.
How often should hardscape be washed in Austin?
Most retail and office properties run quarterly on entries and walkways, monthly on heavy-traffic spots like patios, drive-thrus, and dumpster pads. Austin’s oak pollen, cedar season, and year-round outdoor traffic tend to set the cadence — we’ll recommend one based on your surfaces and tenant mix.
Get started
Get a pressure washing quote for your Austin property
Describe the surfaces and square footage — we’ll build an Austin washing rotation with recovery included.
25+ years in Texas · OSHA compliant · NAPSA certified
"*" indicates required fields